Did you cut/undo the cable? Get a pick and see if you can push it out from the other side or wedge it under and flick it out. Wd 40 if not. Would look for that models manuals or videos online.
Switchen on
Make sure you’re putting tension in the table by pulling it by hand while shifting into the lowest tension gear.Â
zxert13 on
I had a similar issue where the cable head unseated and got jammed internally.
I had to take apart the shifter internals to access the cable housing and remove the shifter cable.
LukaNyan on
I fixed it by slightly unscrewing the plastic part at the top, lifting it just enough to pull the stuck cable out. Thank you all!
4 Comments
Did you cut/undo the cable? Get a pick and see if you can push it out from the other side or wedge it under and flick it out. Wd 40 if not. Would look for that models manuals or videos online.
Make sure you’re putting tension in the table by pulling it by hand while shifting into the lowest tension gear.Â
I had a similar issue where the cable head unseated and got jammed internally.
I had to take apart the shifter internals to access the cable housing and remove the shifter cable.
I fixed it by slightly unscrewing the plastic part at the top, lifting it just enough to pull the stuck cable out. Thank you all!