Slight slight correction Shifting up a gear means smaller cog and Shifting down a gear means a bigger cog Basically In Gear terms the smaller the higher in size terms its the smaller the lower Also did you fall? Your hanger looks bent
Its actually 1 click is release( so it goes high or step down to smaller cog) 2nd click is pawl bite to step up 3rd click is 2nd pawl bite to step up again.
Remember to not pull back when going into 2nd click or it might release and goes to smaller cog Remember when p Wish this helps
Hi, im new to bicycle and i have a question (im kinda annoying.) So i saw a frame and i liked it. I noticed that its a fixed gear frame. The question is, since im a newcomer and i think im not capable of using a fixed gear, yet, can i use 7-9 speed sprocket and 3 front ratio(?) on it? I noticed the rear triangle ends with a track fork end(?) not dropout, can i use a derailleur hanger on it so i can use sprockets instead of a single cog? Thank you!
41 Comments
Will the sensah 2×8 speed shifter be compatible with shimanos 2×8 gear set?
J'aime beaucoup mes shifters sensha empire pro 12v.
in ignite too
Gud
That throw is comical
Говно блядь собачье, ебусь с этой хуйней полгода, блевотина, лучше бы добавил 100$ и 105 купил бы, НИКОГДА не покупайте это!!!!!!!!!!!
Just like sram double tap, not a fan. Also hangers pretty bent.
zajebista❤❤❤❤
What rd are you using? 105?
Awful
Is it compatible with Shimano Ultegra 6700 10 speed
Just like Sram DoubleTap. 😊
So like sram
Nasty cheap shift action like SRAM 😂
Not fan Shimano or Sram shifting mechanism sucks Screws that..what a pain and ass .That's why I like Campagnolo.
How about the front derailleur?
Es una copia del SRAM
Just me or does that hanger seem way off
Wawooooo exactly like the old cable gears no different at all. Fantastic
Works for sensah phi 👍
Slight slight correction
Shifting up a gear means smaller cog and Shifting down a gear means a bigger cog
Basically
In Gear terms the smaller the higher in size terms its the smaller the lower
Also did you fall? Your hanger looks bent
Is that a oval chainring
What button do I push to order egg fu yung?
This made shifting difficult and probably not good when you are racing.
I use a Sensah Ignite shifter with Shimano Sora RD. Works great! Gotta change my FD to Sora soon.
SRAM double tap
I find it hard at firstvbut got the hang of it
Its actually
1 click is release( so it goes high or step down to smaller cog)
2nd click is pawl bite to step up
3rd click is 2nd pawl bite to step up again.
Remember to not pull back when going into 2nd click or it might release and goes to smaller cog
Remember when p
Wish this helps
Hi, im new to bicycle and i have a question (im kinda annoying.) So i saw a frame and i liked it. I noticed that its a fixed gear frame. The question is, since im a newcomer and i think im not capable of using a fixed gear, yet, can i use 7-9 speed sprocket and 3 front ratio(?) on it? I noticed the rear triangle ends with a track fork end(?) not dropout, can i use a derailleur hanger on it so i can use sprockets instead of a single cog? Thank you!
How do you shift down to bigger cogs
How about fd?
Thanks bro i dont know how to use
Thank u ware much😅
Now I know why I always skip to 4 when I max the click.
Shifts seem very positive. Reminds me of ultegra 6600.
Interesting
What size of your spocks
Nice bent derailer hanger
Oval chainring?"
Finally now i understand
I don’t think anything is as nice as shimano still
레버모양: 시마노
변속방식: 스램