Lost the screw that attaches the Garmin mount to the headlight. Can I get something similar at hardware store or should I order a new mount? The screw came w the mount. Thanks!
I’d try the hardware store. They have every size
MeMyselfundAuto on
it’s a m4x1.5 or something similar. does the mount have a screw?
wskyindjar on
gopro. or basically any nut bolt combo that fits
SaulTNuhtz on
You can use any machine screw that fits. I would opt for a crown style machine screw and associated washer. Does this have the female end attached? If not, then I would get a locking nut (the kind with the nylon insert) to put on the other end.
Particular_File5817 on
Google gopro screw, you’ll find many options available
coobytron on
Hows that k edge adapter holding up?
Cool-Newspaper-1 on
Seems to be an m5 bolt. If you want to save some money, don’t get anything labeled Gopro, but just get one (or more) from the hardware store. They’re sold by weight, I’ve bought a lot of screws for single digit cents instead of the 100+ -fold you’d pay for the same thing with a different name.
elBurritoBurglar on
already got similar comments but i would just take both parts to your local hardware store & test bolts to see what fits best. will only cost you a couple dollars. you could try to track down an oem replacement but youll pay way more than you need to. i’d put a small knurled nut with an o-ring or split washer on it so you can adjust it by hand. good luck!
8 Comments
I’d try the hardware store. They have every size
it’s a m4x1.5 or something similar. does the mount have a screw?
gopro. or basically any nut bolt combo that fits
You can use any machine screw that fits. I would opt for a crown style machine screw and associated washer. Does this have the female end attached? If not, then I would get a locking nut (the kind with the nylon insert) to put on the other end.
Google gopro screw, you’ll find many options available
Hows that k edge adapter holding up?
Seems to be an m5 bolt. If you want to save some money, don’t get anything labeled Gopro, but just get one (or more) from the hardware store. They’re sold by weight, I’ve bought a lot of screws for single digit cents instead of the 100+ -fold you’d pay for the same thing with a different name.
already got similar comments but i would just take both parts to your local hardware store & test bolts to see what fits best. will only cost you a couple dollars. you could try to track down an oem replacement but youll pay way more than you need to. i’d put a small knurled nut with an o-ring or split washer on it so you can adjust it by hand. good luck!