My odyssey clutch v2 freecoaster locks up when tight on the frame but it engages and shot just fine when off it. Anyone have any fixes i know how to work on it i just dont know the problem.
I had a similar problem. After close inspection I found the drive outside collar was split causing it to bind after tightening. My was caused by over tightening the rear hub after hitting a rail, me trying to prevent the wheel coming loose. I definitely damaged the hub with excessive torque which in turn split the outside collar. Fortunately I was able to find parts via HarverterBMX. Thank fuck because parts are almost impossible to find in Canada. Hope this helps. Otherwise your into a new coster/ rebuild kit/parts/ or full wheel set depending on the damaged piece.
1 Comment
I had a similar problem. After close inspection I found the drive outside collar was split causing it to bind after tightening. My was caused by over tightening the rear hub after hitting a rail, me trying to prevent the wheel coming loose. I definitely damaged the hub with excessive torque which in turn split the outside collar. Fortunately I was able to find parts via HarverterBMX. Thank fuck because parts are almost impossible to find in Canada. Hope this helps. Otherwise your into a new coster/ rebuild kit/parts/ or full wheel set depending on the damaged piece.