TEAM ASSOCIATED RC10 CC finished with some crazy lighting

Welcome back to Wtf Rc Cars

TEAM ASSOCIATED RC10 CC finished with some crazy lighting.

#AS6004 – TEAM ASSOCIATED RC10CC CLASSIC CLEAR EDITION KIT
https://www.rccarshop.co.uk/AS6004-TEAM-ASSOCIATED-RC10CC-CLASSIC-CLEAR-EDITION-KIT

RC LED Light Strips for RC ￡13.34
https://s.click.aliexpress.com/e/_DnnDxpL

TEMU affiliate link
https://temu.to/m/u5q1sbd14an

CNHL batteries discount code craig5%off
https://chinahobbyline.com/discount/craig5%25off?ref=Cnhlwtfrccars

Contact me at wtfrccars@gmail.com

Kits available from
https://rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777
Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 – 4.00

Are hi YouTube Welcome Back to wfrc cars so we’ve got the rc10 CC completely finished um still not got the replacement Knuckles and still not got the uh Missing e-clip unfortunately I think it’s been about 3 week now and I’ve not heard anything from CML or Team

Associated um but we do have it finished I’ve decided to just give it a quick blast over on the inside with pearl for the uh actual wing and body and the driver I’ve used the uh LM L flake lame flake whatever it’s called just to uh

Highlight it a little bit just to make it so you can see this something on it shows up really well under some light and then other light it looks completely clear but let’s bring you in for a close-up look and uh take you through a few things I’ve done with this and it’s

A little bit different to any other rc10 CC that I’ve seen so we’ve got the actual lights fitted now to attach the driver cockpit I’ve actually screwed it through because I didn’t want some like real black bits of sticker just showing on it not sure if I’m going to put the

Actual transfer stickers on it but I didn’t want the black sticky tape showing through so I’ve actually moved these lights back slightly and bolted them straight through to all the uh actual body on now it’s a weird one um strange design I mean that just pushes

In it does tell you to bend it slightly so if you’re wondering how we fit the body the wing sorry that’s basically how it fastens on and just pushes in there them two holes the body doesn’t particularly fit well um so if we look on front I’ve actually fitted the two Extra

Spaces under the front mount and it’s it’s still no when where the body actually sits you end up really forcing the body shell down um but the rear I’ve also had to add two more of the shims to that one so you need your whole cup for the

Actual body and that’s how I’ve mounted the driver cockpit I’m not sure if any of the uh sort of glitter effect will show up but I have painted it in Pearl and the uh weird Tamia flake color that’s all metallic um I did Mask all the windows off so they’re all perfectly

Clear but uh yeah it does fit I’ve got the electronics fastened in and we got it bound up to the Fly Sky mb4 so let’s see if I can get any of these body pins to go back in so the front one will go in so will the

Back but the uh colors on the shocks to loosen them off and move them around cuz where the kit tells you to put them facing in you can’t get to adjust them and they hit the actual body shell um just choke that up to another glaring floor with this kit

Um be careful when you print body shell on it always Pops that little rubber grommet out but other than that everything else it does it will go together um the design at wing it is what it is there’s nothing holds it in so if you roll it it’s going to

Squash it to car or if it catches it it’s going to rip it out but I thought I’d do something a little bit different with this uh kit that i’ not seen done yet so we have uh fully controllable left and right lighting so we can have them same color different colors

I thought seems so you don’t spray this RC might be nice to have a choice of what color you have it or if nothing else you can turn it into a lamp and then at least it serves some use cuz there’s not really much else used for this

Kit but yeah we got loads of colors to choose from and you can have it in white if you like or we can have it doing some crazy weird Chase effects or it will strobe not sure if that just carries on going through colors or just stays Blue but we’ve also got color

Cycle so this will just constantly keep going through different colors not sure how well these are going to show up on camera but these LEDs are insanely bright and then you can also have RGB or you can turn it off and when you do power on the

RC you get the chase effect so you know it’s actually turned on but yeah what’s the different lighting effects to choose from and all you do is either press and hold the channel that you’ve got connected this kit up to so all I’ve done with these is just

Stuck the LEDs around the outside and it just plugs into channel 3 um I will leave a link to the actual light kit in the description if I can find it still I did get a good few of the Um and they do work really well crazy bright they don’t need extra power they just plug into receiver and it effectively splits one channel into two um by long or short press so it lets you control both sides from one channel there is actually buttons on the

Controller as well you can press them to uh change it so if you did just want to power this up you can still set the lights if you just wanted it powered um off a battery powering the receiver you could do it or you could just have a uh 6volt

Battery powering the actual lights if You’ prefer to do that but I thought if this is going to be a shelf Queen then it may as well be a lamp and they are they are crazy bright um it would work as a lamp but let’s wrap this one up so there

You have it a craz insanely bright rc10 CC and I think it’s about the best thing you can do with this kit just turn it into a table lamp but hopefully you find the video amusing entertaining or just useful but thanks again for watching WTFC cars don’t

Forget to like And subscribe hit the notification Bell share to friends and family and uh catch you guys again in the next One